ru-RUuk-UAen-GB

Kinematic viscometer: SVM 3001

Full description

Wide-range viscometer for unparalleled flexibility


Whether you want to certify jet fuel or diesel, measure lubricants or heavy fuels, or classify crude oil, SVM 3001 is the best solution for your application. All samples can be measured with one integrated cell from -60 °C to + 135 °C. The Peltier temperature control enables fast heating and cooling rates and the embedded PC provides a wide range of automatic calculations including bias-corrected ASTM D445 results, API grades, viscosity index, and more.
Enjoy unlimited applications with the power of SVM 3001.

Experience the all-rounder for a wide temperature range
The outstandingly wide temperature range of SVM 3001 (from -60 °C to +135 °C) enables you to use the instrument as a low- and high-temperature viscometer. Temperatures down to -20 °C can be reached without external cooling, making it ideally suited for jet fuel certification. Additionally, SVM 3001 provides fast heating and cooling rates of up to 20 °C/min, enabling time-saving operation and exceptionally fast temperature scans to investigate the temperature behavior of your samples.

One measuring cell – all samples
With SVM 3001, there is no need for multiple baths and capillaries to measure different samples. Get all the flexibility you need in a single instrument. With only one measuring cell, SVM 3001 covers the entire viscosity, density, and temperature range, enabling you to measure a wide variety of samples. Benefit from the most flexible viscometer on the market.

Multiparameter measurement
Besides viscosity you can determine multiple other parameters from just one syringe and reduce your workload to a minimum. Need to classify your crude oils according to API grades? SVM 3001 has you covered. Parameters measured by SVM 3001 comply with the following industry standards:
• Kinematic viscosity (ASTM D7042, EN 16896, DIN 51659-2)
• Density (EN ISO 12185, ASTM D4052, IP 365)
• Dynamic viscosity (ASTM D7042)
• API grades (ISO 91, API 2540, ASTM D1250, IP 200)
• Viscosity index (VI) (ASTM D2270)

Full compliance with all necessary specifications
SVM 3001 complies with a multitude of standards and specifications, fulfilling all necessary regulations in order to ensure that highest product quality requirements are met. These include:
• Jet fuel (ASTM D1655, Def Stan 91-91, JIG AFQRJOS)
• Diesel fuel oils (ASTM D975)
• Biodiesel blends (ASTM D975, ASTM D7467)
• Fuel oils (ASTM D396, ASTM D6823, ASTM D7666)
With the implemented bias corrections (developed by ASTM), the user can report D445 results while enjoying all the benefits of measuring with an SVM according to ASTM D7042.

Cost-effectiveness and sustainability at its best
In addition to its unparalleled flexibility, SVM 3001 also helps you cut solvent and disposal costs. Thanks to the unique patented measuring cell design, the instrument requires only small volumes of solvent for cleaning (min. 1.5 mL). As no external cooling device is required for measurements at temperatures as low as -20 °C, SVM 3001 also saves valuable lab space. While delivering superior temperature performance, the SVM viscometer consumes much less energy than a typical capillary bath, regardless of whether you are measuring jet fuel viscosity at -20 °C or wax viscosity at +135 °C. As a result, the smart viscometer provides you with the best ROI on the market.
Product specification
Model SVM 2001 SVM 3001 SVM 4001 SVM 3001 Cold Properties
Patents granted AT5160588 (B1), US10036695 (B2), CN105424556, AT516302 (B1), CN105628550
Temperature  +15 °C to +100 °C -60 °C to +135 °C +15 °C to +100°C +15 °C to +100°C
range        
Viscosity range 0.2 mm²/s to 30 000 mm²/s*
Density range 0.6 g/cm³ to  3 g/cm³
Viscosity  0.1 %
repeatability*        
Viscosity  0.35%
reproducibility*        
Density  0.0002 g/cm³ 0.00005 g/cm³ 0.00005 g/cm³ 0.00005 g/cm³
repeatability*        
Density  0.0005 g/cm³ 0.0001 g/cm³ 0.0001 g/cm³ 0.0001 g/cm³
reproducibility**        
Cloud/freeze        <0.5 °C / <0.5 °C
point         
repeatability**        
Cloud/freeze        <2.5 °C / <1.3 °C
point         
reproducibility**        
Temperature  0.005 °C (0.009 °F)
repeatability        
Temperature  0.03 °C from   0.03 °C from  0.03 °C  from 0.03 °C from  
reproducibility 15 °C  to 100 °C 15 °C  to 100 °C 15 °C  to 100 °C 15 °C  to 100 °C
    0.05 °C  outside   0.05 °C  outside
     this range    this range
Test methods ASTM D7042, ISO  ASTM D7042, ISO  ASTM D7042, ISO  ASTM D7042, ISO 23581, 
  23581, EN 16896 23581, EN 16896 23581, EN 16896 EN 16896
    ASTM D4052, ASTM D4052,  ASTM D2386 equivalent 
     ISO 12185 ISO 12185 or better, ASTM D2500 
        equivalent or better
Supported  Ultrafast, Fast  Ultrafast, Fast,  Ultrafast, Fast,  Ultrafast, Fast, Precise 
  and Precise Precise  Precise and  and Ultraprecise
precision classes   and Ultraprecise Ultraprecise  
Sample volume  1.5 mL / 5 mL 1.5 mL / 5 mL 2.5 mL / 6 mL 1.5 mL / 5 mL
min./typical        
Solvent volume  1.5 mL / 6 mL 1.5 mL / 6 mL 2.5 mL / 10 mL 2.5 mL / 6 mL
min./typical        
Maximum sample  30 samples  30 samples  24 samples  30 samples per hour
throughput per hour per hour per hour  
Peltier  Designed for  Designed for fast  Designed for  Designed for fast 
temperature  constant  heating/cooling  simultaneous  heating/cooling over 
control temperature over a wide  measurement  a wide range
    range at any two diff.   
      temperatures  
      within the range  
Data memory 1000 measurement results
HID (Human  Touchscreen
Interface Device) optional keyboard, mouse and 2D bar code reader
Interfaces 4 x USB (2.0 full speed)
  1 x Ethernet (100 Mbit)
  1 X CAN bus
  1 x RS-232; 1 x VGA
Power supply AC 100 V to 240 V, 50 Hz to 60 Hz, 250 VA max
Ambient  15 °C to 35 °C (59 °F to 95 °F), max. 80% r.h. non-condensing
conditions  
Net  weight/ 15.9 kg/20.5 kg 17.6 kg/22.2 kg 17.8 kg/22.4 kg 18 kg/22.2 kg
shipping weight        
Dimensions 33 cm x 51 cm x 23.1 cm (13 in x 20 in x 9.1 in)
 (W x D x H)  
Compliance CE mark CE mark CE mark CE mark
  EMC directive EN 61326-1
  LV directive EN 61010-1
  RoHS
Included in  Kinematic  Automatic VI  Simultaneous  Cloud point
standard delivery viscosity determination kinematic  Freezing point
  Dynamic  API calculations viscosity and  Temperature @ 12 
  viscosity Temperature  density at any  mm²/s (Kinematic 
  Density scan two different  Viscosity Borderline 
    Time scan temperatures in  Temperature: KVBT)
    FillingCheck™ the range Standard above
    Kinematic  Automatic VI   freeze point (SFP)
    viscosity determination Automatic VI 
    Dynamic  API calculations determination
    viscosity Temperature  API calculations
    Density scan Temperature scan
      Time scan Time scan
      FillingCheck™ FillingCheck™
      Kinematic  Kinematic viscosity
      viscosity Dynamic viscosity
      Dynamic  Density
      viscosity  
      Density  
Options Automatic VI  Modularity with  Modularity with  Sample changer, 
  determination Abbemat  Abbemat  non-heated
  Sample changer,  refractometers refractometers Counter-cooling
  heated Chemical Sample changer,   
  Sample changer,  upgrade kit heated  
  non-heated Sample changer,  Sample changer,   
    heated non-heated  
    Sample changer,     
    non-heated    
    Counter-cooling    
*Viscosity range with chemical upgrade kit from 1 to 10 000 mPa·s
**Attested at the points of the works adjustment or at calibration correction points, 
not including the uncertainty of the standards.
Valid for ideal measuring and sample conditions within the works adjustment range.
SVM (EM13411996), Stabinger Viscometer (WO1232458, EM12708863), FillingCheck (EM006834725)
Downloads
SVM.pdf
Multimedia
Lk3TkPo0T84


TcyqsrZbfk8


yLh8Rn4plPc



To get information about: «Kinematic viscometer: SVM 3001» contact us by phone (044) 229 15 31 or fill in the form.
E-mail
Phone
First name
Family name
Country
Company name
Request
Input symbols from the picture