100 % Precision
The MultiTest 50 sets new standards in precision and repeatability. Powerful state-of-the-art electronics, a precision S-beam load cell, and solid mechanical components provide for extremely accurate results. Samples are individually placed into the MultiTest 50 testing area. Practically any imaginable design, including oblong, diamond, hexagon, and other special shapes, can be reliably positioned and measured.
Simple tablet handling
The open and accessible test area allows for simple tablet orientation by the operator. To assist with the alignment of very convex shapes, the MultiTest 50 features grooved quick-change tongues that can be exchanged in a matter of seconds.
Fast, Faster, FastTest™
In “FastTest™” configuration, the MultiTest 50 is a multi-purpose instrument that accumulates measurements from an integrated thickness gauge and from an external analytical balance in a single test report. Instead of collecting data individually and having to deal with various reports, all results are automatically evaluated and documented.
Simply the fastest way to perform tests. The operator transfers tablets after weighing to a carousel mounted on top of the MultiTest 50. Once weight measurements have been acquired for a series of tablets, thickness is measured using the integrated precision gauge. With one hand turning the carousel and the other controlling the thickness gauge, accurate measurements for the entire series are taken in a very short time without compromising the order of test samples.
Width, diameter/length and hardness tests are executed afterwards by placing single tablets in the test area. To save time, operators can still take additional weight and thickness measurements while a hardness test is running. In automatic mode, individual measurements are started at programmable intervals.
EasyTouch™ - User-friendliness redefined
Operating a manual tablet tester has never been easier. The intuitive icon-based EasyTouch™ user interface sets new standards for fast and user-friendly control. Three different test modes allow using the MultiTest 50 according to individual requirements.
FullTest™ - Automatically evaluate test results
EasyTest™ - Simply enter the number of samples to be tested
SingleTest™ - Quickly test a single tablet
Model | MultiTest 50 |
| |
Weight | |
Measuring range | Up to 100 g |
Resolution | 0.1 mg |
Units of measure | mg/g |
Type of external balance | MettlerToledo®, Sartorius® |
Thickness | |
Measuring range (integrated thicknes gauge | Up to 20 mm ( 0.79 inch) |
Measuring range (internal) | Up to 35 mm ( 1.37 inch), optional 65 mm (2.55 inch) |
Resolution | 0.01 mm (0.00039 inch) |
Units of measure | mm/inch |
Diameter/Length/Width |
Measuring range | Up to 35 mm ( 1.37 inch), optional 65 mm (2.55 inch) |
Resolution | 0.01 mm (0.00039 inch) |
Units of measure | mm / inch |
Hardness | |
Measuring range | Up to 800N |
Accuracy | Better than +/- 1 N |
Units of measure | N, Sc, Kp, programmable user-defined factor |
Hardness measuring principle |
Constant speed | Up to 5 mm/sec, programmable |
Linear force increase | Up to 200 N/sec, programmable |
Other |
Power supply | 100–230 V, 50–60 Hz |
Interfaces | Ethernet, USB, RS232 |
Printer type | PostScript® network printer (LAN), PostScript® USB printer, serial printer |
| |
MultiTest 50
MultiTest 50 Manual Tablet Hardness Tester English brochure
Тестеры физических параметров
Брошюра на Тестеры физических параметров на русском языке
Презентация ПО Q-doc
Презентация ПО Q-doc для реализации концепции целостности данных
To get information about: «MultiTest 50 Manual Tester» contact us by phone (044) 229 15 31 or fill in the form.