Powerful and flexible system control
Take full advantage of the highest modularity and flexibility of the Sepacore flash chromatography systems using the established SepacoreControl software. Providing complete automation together with optimal flexibility for in-run interaction, this software enables fast and high performance purifications.
High performance
• Processing of up to eight detection signals for peak detection and collection
• On-line UV scan of the eluting compounds for easy recognition
• High yield fraction collection using the dead volume compensation functionality
Flexible
• Monitoring of any detector signal in addition to UV-Vis and ELSD
• Control of up to two fraction collectors for an extended collection capacity
• Easy programming of customized collection formats
Time saving
• Fast separation method optimization with extensive in-run parameter changes
• Most compounds detected at once with the simultaneous monitoring of four wavelengths in the UV-Vis range
| |
Model | SepacoreControl |
| |
System requirements | |
The PC must fulfill the following requirements: | |
Operating System | Windows 7 Professional/Ultimate/Enterprise (32-bit, 64-bit), SP1) and Windows 8 Pro (64-bit) |
Central Processing Unit | Intel Core i3 or higher, 1.4 GHz or faster |
RAM | 3 GB RAM or more |
Harddisk | >5 GB of free hard disk space |
Display resolution | 1280 × 1024 (minimum 1024 × 768) |
Interface | USB 1.1 or higher |
Others | DVD-ROM drive |
Languages | en / de / fr |
| |
Control Unit C-620 | |
Dimensions (W × H × D) | 465 × 110 × 118 mm |
Weight | 2.8 kg |
Power consumption | max. 30 W |
Connection voltage | 100 – 240 V ± 10 % |
Fuse | T 8A L 250 V |
Frequency | 50/60 Hz |
Installation category | II |
Degree of protection | IP20 |
Pollution degree | 2 |
Minimum system configuration | |
| 1 Pump C-601 or C-605 |
| Fraction collector C-660 |
| Detector (C-640, C-650 or other through Analog input 1V) |
Firmware version | |
Pump Module C-601/5 | 3.0 and 3.4 |
Fraction Collector C-660 | 1.12 |
UV Monitor C-630 | 3.1 or higher* |
UV Photometer C-635 | 3.1 or higher* |
UV-Vis Detector C-640 | 2.29 |
Environmental conditions | |
Temperature | 5 - 40 °C for indoor use only |
Altitude | up to 2000 m |
Humidity | Maximum relative humidity 80 % for temperature up to 31 °C decreasing linearly to 50 % relative humidity at 40 °C |
| |
Technical data sheet in English
Preparative_Chromatography_Solution_brochure_ru_A_01.pdf
To get information about: «SepacoreControl Software» contact us by phone (044) 229 15 31 or fill in the form.