PILODIST introduces a new QUICKDIST 500 CC as an ultra-fast distillation system or the fully automatic fractionation of stabilized hydrocarbon products.
Specially developed for the separation of hydrocracked or catalyst product samples into their different cuts (for example: Naphtha, Kerosene, Diesel). The unmatched timeframe of less than three hours is achieved in a fully automatic process through different pressure stages similar to ASTM-D2892.
The system is equipped with a distillation column packed with high efficient SULZER EX packing to ensure a proper efficiency also under high throughput conditions. The fully automatic discharge system is optimized with minimum hold-up for a closed mass-balance also with small charges.
The whole process is performed fully automatically (in PILODIST CC-version) from start to the final cut and can operate through 4 pressure stages down to 1 mmHg (Torr) absolute pressure without any user intervention. A quench coil and a special thermostat system reduces the intermediate cooling phases and in combination with a fast heat-up process the runtimes can be reduced to an unique minimum.
| Model | QUICKDIST 500 CC |
| Operation temperature (flask) | max. 350°C |
| Final Cut point (AET) | max. 420°C |
| Operation pressure | ATM – 1 Torr abs |
| Column efficiency | up to 30 theoretical plates |
| Flask Sizes | 500ml, 1 L, 2 L |
| Charge | up to 60% of flask volume |
| Receiver size | 20x 100ml |
| |
Crude oil distillation .pdf
To get information about: «QUICKDIST 500 CC» contact us by phone (044) 229 15 31 or fill in the form.