ru-RUuk-UAen-GB
Menu
  1. Suppliers >
  2. PILODIST >
  3. Crude oil distillation systems >
  4. PETRODIST 400S

PETRODIST 400S

Full description
Crude oil distillation system for semi-automatic operation according to

ASTM D-2892 (TBP)
ASTM D-5236 (Potstill)

The PETRODIST 400 S is a combination system for alternative operation of the following systems

PETRODIST 100 S (ASTM D-2892)
PETRODIST 200 S (ASTM D-5236)

The central fraction collector is used for both PETRODIST 100 S as well as PETRODIST 200 S. The vacuum supply, the cryostat/ thermostat and the control station are also used for both systems. The unit requires water, nitrogen, compressed air and electricity. Dry ice or liquid nitrogen is required for cold traps.

The cuts are taken automatically according to the pre-selected boiling temperature or when the receivers are filled up. The vacuum tight fraction collector contains 9 receivers.

All necessary accessories will be supplied together with the system. The installation requires water, nitrogen, compressed air and electricity.
Product specification
Model PETRODIST 400 S
 Equipment for ASTM D-2892 (PD100)
Available flask sizes 2, 4, 6, 10, 20 L
Operating pressure vacuum down to 0,1 Torr
Operating temperature Up to 350° C (660° F)
Final cut temperature up to 565° C AET
Equipment for ASTM D-5236 (PD200)
Available flask sizes 2, 4, 6, 10, 20 L
Operating pressure vacuum down to 0,1 Torr
Operating temperature Up to 350° C (660° F)
Final cut temperature up to 565° C AET
Common data
Receiver capacity 9 x 500 ml 
Max ambient temperature 25° C
Mains supply 3 x 208 – 250 V, 50 Hz 
  (60 Hz upon request)
Power consumption 8000 W (without options)
Dimensions (w x h x d) 2.30 x 2.90 x 0.90 m
Downloads
Crude oil distillation .pdf
2013PETRODIST_400S1.pdf
brosch_engl 1.pdf

To get information about: «PETRODIST 400S» contact us by phone (044) 229 15 31 or fill in the form.
E-mail
Phone
First name
Family name
Country
Company name
Request
Input symbols from the picture