| Model | FlexyCUBE |
| Reactor(s) |
| Volume | 250 ml (70, 100 or 400 ml optional); 6 bar glass or 100 bar SS optional |
| Material | Borosilicate glass, 6 bar or 100 bar SS/Hastelloy optional |
| Reactor Lid Tapers | NS29 for stirrer, NS19 for each of the following items: temperature sensor, pH |
| | sensor, pressure sensor, reflux cooler and dosage adaptor with 4 GL14 connectors |
| Temperature Range | -80°C to +280°C |
| Heating | Electric heater 230 VAC, 500 W |
| Cooling | By means of refrigerated circulator, shared among all reactors |
| Stirrer | Speed controlled, 80 to 650rpm/35 Ncm |
| | High-Torque version: 80 to 650rpm/appr. 100Ncm, or 200-2000rpm/appr. 60Ncm |
| Equipment Venting | Using dry air or nitrogen through connectors provided at the rear of the unit |
| Equipment Cooling | Cooling water, 20 l/h; incl. reflux coolers, all units daisy-chained |
| (Surfaces) | |
| In-/Outputs |
| Types (number) | Pt-100 (2x), 4-20 mA (4x), 24 VDC (2x) |
| Measurement | TR, TH, pH, pressure/vacuum ... with automatic recognition of sensor and units |
| Actuators | Cooling water and purging gas solenoid valves |
| Balances | Max. weight 2000 g, 0.1 g resolution |
| Dosages |
| Number / type of | Max. 2 per FlexyCUBE, alternatively with pump or valve, with balance |
| dosage | or w/o (=volumetric) |
| Dosage pump | Electronically controlled peristaltic pump, ranging from 0...100 % |
| Dosage rate | Flow depending on tube dia., max. 250 ml/h |
| Dosage tubes | Material: Silicon, Viton, Novoprene (standard), Chemsure (PTFE-like) |
| Control Unit |
| Electronic | Built-in electronics, no additional interface hardware required |
| Network | LAN interface, either directly from PC or through switch |
| Expansion modules | Universal I/O-modules, RS-232 interface, Calorimetry, etc. can be connected |
| | at rear of FlexyCUBE |
| PC Software |
| Operating system | Windows XP, Windows 7/8, MS-Office |
| Application | FlexySys Rel. 2.x / Release 3.x, SysGraph |
| Techn.Specification |
| Ambient temperature | 10°C...35°C |
| Power input | 230 VAC, 5 A, 50/60 Hz, single phase |
| Power input / unit | Single phase, 600 VA |
| Dimensions and | 330 (height) x 200 (width) x 340 (depth) mm, approx. 20 kg. |
| weight | Depth with pump only: 395 mm, depth with pump and balance: 490 mm |
| |