USP 4 Manual Closed Loop, Pharmaceuticals and cosmetics

All
Full description
Product specification
Downloads
Send request

USP 4 Manual Closed Loop

Request additional information

Full description

The closed loop system set-up is the most used, it allows complete flexibility of volume from 15 mL to 4'000 mL and will provide cumulative data on dosage forms, which are difficult to position in a vessel in a reproducible way (e.g. powder, suspensions, implants, gels, creams, microspheres, suppositories, liposomes…).

USP 4 Manual
When dissolution is performed manually, every process step before, during, and after the test is executed manually by the user. This is the most technician-dependent way of testing.

CE 7smart Manual Closed Loop

The entry level for USP 4 system to get cumulative results on all dosage forms reproducibly in any media volume
Adapted to a great variety of dosage forms
Temperature monitoring, accurate flow rate by valveless ceramic piston pump, filter saturation detection

Compliance
The CE 7smart complies with the actual USP, EP, JP requirements and can be used in R&D and QC for compendial and non-compendial methods.

Designed for cells
The cell holder of the CE 7smart can integrate and maintain in temperature all kind of compendials and non-compendial cells for the testing of tablets, capsules, powders, APIs, lipophilic forms, suppositories, suspensions, liposomes, microspheres, semi-solid, implants and medical devices.

Flow-rate accuracy
The CE 7smart has been designed to ensure a precise circulation of media through seven cells. With its firmware, the apparatus can control different types of pistons and peristaltic pumps which are easily connected to the CE 7 smart using color-coded fittings.

Firmware control
Methods, samplings, and run protocol are driven by the instrument firmware. The front panel keypad with graphic display shows method parameters such as sampling times, media, temperature, flow rate, cell type and volume.

User-friendliness
One cell holder for easy load and unload of seven cells without fitting or screwing mechanism allows for easy operation of the system.

Product specification

Components

CE 7smart Dissolution Apparatus

The cells of the CE 7smart are designed for MR (modified release), CR (controlled/continuous release) and ER (extended release) tablets, capsules, suppositories, powders, pellets, APIs, implants, medical devices, ophtalmic devices, drug eluting stents, creams, gels, suspensions, microspheres, liposomes and nanospheres.

The apparatus is suitable for R&D and QC, manual and automated sampling, firmware or software driven, linked to UV and fraction collector for HPLC analysis.

It is an evolution of the original Flow-Through Cell system designed by Dr Langenbucher and SOTAX 35 years ago and is compliant to USP, EP and JP for small volume dissolution and poorly soluble compound testing under sink conditions.

CP 7-35 Piston Pump

The CP 7-35 pump is equipped with 7 valveless, self-priming ceramic pump heads, ensuring a very high level of consistency and accuracy.

Due to design, this pump maintains consistency and efficiency even if it is placed before the filtration. It overcomes problems associated with pumping viscous media.

The CP 7-35 is constructed with inert material including ceramic heads and pistons with Teflon media tubings. The flow rate can be adjusted automatically from 4 to 35 mL/min using the control panel and it can also be adjusted channel per channel.

Downloads

CE 7smart Flow-Through Cell Dissolution Apparatus

English Brochure

Piston pump

MPS

Станція підготовки середовищ MPS

To get information about: «USP 4 Manual Closed Loop» contact us by phone (044) 229 15 31 or fill in the form.

E-mail

Phone

First name

Family name

Country

Company name

Request

Input symbols from the picture

Change the picture