Dynamic flow gas sorption analyzer for extremely rapid BET surface areas
As a fully automated state-of-the-art dynamic flow system AutoFlow BET+ allows extremely rapid evaluation of the surface areas of solid samples. It performs single-point or multipoint determination of surface areas quickly and quietly on up to three samples simultaneously and independently. No vacuum pumps are required, reducing setup and maintenance costs while also eliminating time-consuming pump downtime and void volume measurements. The control module features a touchscreen and houses three built-in sample preparation stations. A PC software version which is 21 CFR Part 11 compliant is available for customers characterizing pharmaceutical samples.
Achieving Highest Throughput via Modular Design High throughput matching your analytical needs is achieved with one, two or three independent analysis stations.
Each AutoFlow BET+ analysis station provides highly accurate data by the implementation of:
(a) two built-in mass flow controllers, making the use of premixed gases unnecessary;
(b) a high-resolution MEMS-TCD sensor developed by Quantachrome Instruments; and
(c) precisely defined operating protocols.
The AutoFlow BET+ references all measurements to standard temperature and pressure (STP) conditions, thereby making them calibration-free and independent of ambient conditions. The design of the instrument and its control software makes the operation very robust and user-friendly, making it ideal for both QA and academic lab applications.
Assuring Extremely Rapid Surface Area Evaluations The AutoFlow BET+ can perform a typical 3-point BET measurement in less than 15 minutes per analysis station. Up to three independent analysis stations can be operated simultaneously for high throughput. The AutoFlow BET+ incorporates three different flow paths in order to optimize the analysis speed and resolution of samples covering an extremely wide range of surface areas.
The AutoFlow BET+ also incorporates a 3-station sample preparation module where three samples can be degassed under dry gas flow independently and simultaneously with analyses, using multi-step user-programmable temperature ramp-and-hold protocols for each sample.
Exceptional Speed
• Single point BET surface areas in < 5 minutes per sample.
• Multi-point BET areas in < 15 minutes per sample.
• Advanced design eliminates need for pre- or post-calibration.
Superior Throughput
• Up to three single point BET areas in < 5 minutes.
• Up to three multi-point BET areas in < 15 minutes.
• Up to 36 BET surface area analyses per hour.
Outstanding Precision
• Repeatability (same sample) +/- 0.5%
• Reproducibility (different units) +/- 1.0%
• Accuracy (vs. vacuum volumetric standard) +/- 1%
Simple Operation
• Highly intuitive click-and-start operation.
• No warm-up delay (ready to go when you are).
• Customized analysis reports generated automatically
Accurately Pre-Calibrated
• Saves analysis time (avoids calibration step).
• Improves analytical precision (eliminates operator variability).
• Saves cost (no need for syringes or loops).
Maximum Versatility
• Each module has two built-in mass flow controllers.
• Modules can handle pure gases or mixed gas inputs.
• Each module has an independent MEMS-TCD sensor.
Robust and Reliable Design
•Compact size (as little as 16-inch bench width needed).
• MEMS-TCD Sensors unaffected by flow interruptions.
• Virtually maintenance-free.
Built-in Sample Preparation
• 3 independently programmable degassers.
• Adjustable flows and fast-cooling slots.
• Standard max. temp. = 350 o C (high temp. option to 450 oC).
Unique Software Capabilities
• Supports 21 CFR Part 11 compliance.
• Ethernet and Remote Access.
• Multiple Language Options.
Model | AutoFlow BET+ |
Analysis stations | 1, 2, or 3 | |
| Each station is 100 % independent |
Dedicated degassing stations | 3 | |
| Method: flow | |
Max. temperature of degasser | 350 °C (standard) | |
| 450 °C (optional) | |
BET surface area | >1.0 m² | |
Speed | Single-point: <5 minutes/sample | |
| Multipoint: <15 minutes/sample | |
On-board gas mixing | 2 MFC per analysis station | |
Atmospheric pressure sensing | 1 pressure transducer | |
Calibration required | No | |
Software included | Yes | |
Physical specifications | | |
CPU: with one station | CPU: with two stations | CPU: with three stations |
Height: 62 cm (24 in) | Height: 61 cm (24 in) | Height: 61 cm (24 in) |
Width: 41 cm (16 in) | Width: 60 cm (23 in) | Width: 78 cm (31 in) |
Depth: 55 cm (22 in) | Depth: 55 cm (22 in) | Depth: 55 cm (22 in) |
Weight: 34 kg (75 lbs) | Weight: 50 kg (111 lbs) | Weight: 67 kg (147 lbs) |
|
Voltage | 100 to 120 VAC or 220 to 240 VAC | |
Frequency | 50/60 Hz | |
Power (nominal) | 45 VA | |
Power (max.) | 350 VA | |
Connection | Grounded, single-phase outlet | |
Environmental specifications: normal environment conditions |
Temperature | 5 °C to 40 °C | |
Relative humidity | Up to 80 % (non-condensing) | |
| | |
AutoFlow_BET__Brochure.pdf
Brochure_ParticleCharacterization.pdf
To get information about: «AutoFlow BET» contact us by phone (044) 229 15 31 or fill in the form.