The Calotest series is designed to quickly characterize coating thicknesses between 0.1 μm and 50 μm on a wide range of materials. The simple ball-cratering method used offers a fast and accurate means of checking the thickness of any kind of coating, whether a single or multilayered stack. Typical examples include CVD, PVD, plasma spray coatings, anodic oxidation layers, chemical and galvanic deposits, polymers, paints, and lacquers.
Fast measurements in 2 to 5 minutes without sample preparation
Measure the coating thickness of your sample in a couple of minutes without any time-consuming sample preparation. This puts Calotest ahead of other methods that require the sample to be embedded, cut, grinded, polished, and etched before conducting a measurement which usually takes more than one hour.
Accurate thickness results of single- and multi-layers alike
Multi-layer coatings are gaining interest in industry due to their better wear resistance and resistance to fracture. Anton Paar provides a comprehensive software for coating thickness measurement allowing you to individually measure one or several layers and print out reports according to the exact needs of your industry.
Analysis of coating thicknesses between 0.1 μm and 50 μm
Industrial components coated with CVD and PVD, anodic oxidation layers, chemical and galvanic deposits, polymers, paints, and lacquers commonly have a coating thickness of between 0.1 μm and 50 μm. The Calotest models are the ideal instruments for a quick and precise determination of coating thicknesses in exactly this range.
Precise measurement on both flat and uneven surfaces
The ball-cratering method employed by Calotest instruments is an easy and reliable way to assess coating thickness on both flat and uneven surfaces. The optional analysis software handles various types of sample shape – including flat, spherical, and cylindrical – and gives accurate thickness measurements of the coating independent of the sample geometry.
| Модель | Calotest2Combo |
| Cкорость вала | от 10 об/мин до 3000 об/мин |
| Временной диапазон истирания | от 1 с до 10000 с |
| Стандартные диаметры шаров | 10, 15, 20, 25.4, 30 мм |
| Международные стандарты | ISO 1071-2, VDI 3198 |
| |
To get information about: «Calotest CAT2combo» contact us by phone (044) 229 15 31 or fill in the form.