ru-RUuk-UAen-GB

HazeQC ME

Full description
• Determination of turbidity in a variety of fluids
• Compliance with acknowledged standards such as MEBAK and EBC
• Modular solution to fit with Anton Paar’s measurement solutions
• Active temperature control for highly precise results

A solution for the measurement of turbidity in liquids, the HazeQC ME turbidity measuring module, is provided by Anton Paar as part of a modular measuring system. The approved ratio method with measurement at three angles (transmission 0°, scattered light at 25° and 90°) is used to prevent the influence of particle size on the turbidity value. The measurement is carried out at a wavelength of 650 nm ±30 nm (MEBAK- and EBC-compliant) in a cell with adjustable constant temperature. This turbidity measuring module expands Anton Paar's product portfolio and adds a further important parameter for analyzing liquid samples - providing the same high quality expected of Anton Paar products.

Accurate and traceable turbidity measurement
• Three-angle turbidity measurement (transmission 0°, scattered light at 25° and 90°) at 650 nm according to MEBAK and EBC
• Approved ratio method eliminates the influence of particle size on the turbidity value
• Highly accurate Peltier-thermostatted cell

Combinations for up to 7 parameters possible
• Up to 7 parameters in one measuring cycle if used in combination with PBA-B (density, alcohol, beer color, pH, CO2, O2, turbidity)
• Combination with all Generation M systems, with Alcolyzer Plus Beer, with Alcolyzer Plus Spirits or with the Beer Analyzing System (Alcolyzer Plus Beer, density meter, sample changer)
• All measurements directly out of the bottle or can, no degassing required if using a PFD Filling Device
Product specification
Model HazeQC ME
Measuring range
Turbidity 0 EBC to 100 EBC (0 NTU to 400 NTU)
Temperature -5 °C to 40 °C (temperatures below 15 °C require an external cooling)
Repeatability s.d.
Turbidity 0.02 EBC (0.08 NTU)
Temperature 0.01 °C
Additional information
Measurement principle Three-angle stray light and absorbance measurement (0°, 25° and 90°), ratio method for the reduction of interferences
Wavelength 650 nm
Minimum sample volume approx. 3 mL
Measuring time per sample 3 to 4 minutes (incl. filling)
Interfaces 2 x CAN
Wetted parts EPDM, FEP, glass, PEEK, PTFE, PU, stainless steel, Tygon
Dimensions 380 mm x 160 mm x 190 mm (15 in x 6.3 in x 7.5 in)
(L x W x H)  
Weight 5.3 kg (11,7 lbs)
External thermostat  Flow rate: 0.4 L/min to 0.7 L/min
(optional) Maximum pressure: 0.5 bar (7.3 psi)
  Temperature of the cooling medium: 15 °C to 25 °C 
Downloads
Currently there is nothing to download

To get information about: «HazeQC ME» contact us by phone (044) 229 15 31 or fill in the form.
E-mail
Phone
First name
Family name
Country
Company name
Request
Input symbols from the picture