ru-RUuk-UAen-GB

Sample Changer: Xsample 530

Full description

The multi-sample changer with the highest cleaning performance


The Xsample 530 sample changer for all Anton Paar master instruments handles samples with a wide range of properties. With controlled filling power, samples from plain water to highly viscous oils (up to 36,000 mPa.s) are filled in a minimum of time. The 71-position magazine for unattended operation can be exchanged with one hand to ensure easy handling and filling.
With up to three cleaning agents, Xsample 530 is ready to measure a great variety of samples in one run. No compromises regarding mechanical components as well as a superior resistance to chemicals ensures increased uptime of the system and low maintenance costs.

Perfect measurement results due to perfect cleaning
• Automatic rinsing and drying after each sample for perfect preparation of the system
• Up to three different solvents can be used in any order to achieve optimal cleaning performance
• Active needle cleaning – inside and outside – prevents any sample cross-contamination.
• Advanced settings for special treatment of the sample to increase performance

Easy operation through simplified workflows
• The removable magazine for easy sample collection has a capacity of 71 samples (12 mL vials) or 35 samples (45 mL vials).
• Customized magazines for almost any type of vial are available to ensure a smooth workflow in your lab.
• Standard modes in the intuitive software enable seamless sample measurement.
• Optional bar code reader for digital error-free data input and automated method assignment

Intelligent checks and procedures according to your needs
• Automatic sample recovery (optional accessory) returns expensive or hazardous samples to its vial
• Automatic filling and draining (sensor-controlled) for low-viscosity samples or samples up to 36,000 mPa.s
• Automatic air check before measurement to rule out sample cross-contamination
• Automatic pressure and tightness test to ensure trouble-free and safe operation
Product specification
Model Xsample 530
Viscosity range  
• Operation with internal air pump 12.000 mPa·s at ambient and measuring temperature
• Operation with 2 bar external compressed air 36.000 mPa·s at ambient and measuring temperature
Filling mode Pressure mode
  • with integrated piston pump
  • with air pump of master instrument
  • with compressed air
  Suction mode (optional)
Minimum sample volume per measurement approx. 3 mL (with master instrument DMA™ M)
  depending on system configuration
Sample recovery optional
Rinse consumption per cycle approx. 4 mL
Sample throughput max. 9 per hour
  depending on application and used pressure source
Number of sample vials 71 positions for 12 ml vials
  optional: 35 positions for 45 ml vials
  customer specific magazines on request
Automatic filling and drying Piston pump, internal air pump of master instrument or compressed air selectable
Compressed air supply 1.80 bar – 2.20 bar (26 psi – 32 psi) relative external compressed air
(optional) typically: 2.0 bar (29 psi) rel.
Necessary quality of air Class 3 from ISO 8573-1:
  max. particle size: 5 μm
  max. pressure dew point:-20°C (-4°F)
  max. oil content: 1 mg/m3
Environmental conditions (EN 61010) Indoor use only
Air humidity 10 to 90% relative humidity, non-condensing
Operating temperature +15 to +35 °C (+59 to +95 °F)
Power supply supplied by master instrument
  Mains voltage according to the type plate at the rear of master instrument (protective grounding required)
Dimensions excl. master instrument 370 mm x 490 mm x 430 mm
(L x W x H) (14.6 in x 19.3 in x 17 in)
Weight excl. master instrument approx. 48 kg (105.8 lbs)
Optional bar code reader Laser Line Scanner, 1D Code Reader class 2
Downloads
All Xsamples
All Xsamples en
Multimedia
5ZUpD5IKrro



To get information about: « Sample Changer: Xsample 530» contact us by phone (044) 229 15 31 or fill in the form.
E-mail
Phone
First name
Family name
Country
Company name
Request
Input symbols from the picture