The Optics Route to Thermal Analysis
TORC 5000 features unique technology in a robust and compact instrument and combines this with powerful measurement software. The Thermo-optical Oscillating Refraction Characterization (TORC) technique enables determination of the coefficient of thermal expansion and monitoring of phase and glass transitions. TORC 5000 is an interesting and economic solution for adhesive and polymer manufacturers, e.g. to monitor curing, polymer reactions as well as the temperature- and time-dependent behavior of samples.
Easy to operate PC software
• Easy management of measurements in a workbook structure
• Monitoring the measurement process via a live result plot
• Predefined measuring modes
Compact and robust design
• Small footprint (smaller than a football)
• Resistant sapphire measurement surface with hardness close to diamond
• Rugged fully anodized aluminum body
• Waterproof and dustproof measuring unit acc. to IP 68
Ready to use immediately
• No temperature calibration needed for daily measurements
• Customer calibration within seconds with a water reference
• Factory calibrated with PTB (National Metrology Institute of Germany) standards for refractive index
The most precise temperature control
• Easy to use Peltier temperature control
• Accuracy of ±0.03 °C across a temperature range from 4 °C to 125 °C
• Pre-heating or cooling of sample well for fast measurement and minimal temperature perturbation of sample e.g. to maintain crystal modification
Flexible sample volume
• From a few µL up to 2 mL of sample measurable
Model | TORC 5000 |
Refractive index* |
Range (nD) | 1.26 to 1.72 |
Resolution (nD) | ±0.000001 |
Accuracy (nD) | ±0.00002 |
Accuracy (dn/dT) | ±0.00001 |
Temperature |
Range | 4 °C to 125 °C |
Heating rate/cooling rate | 0.001 °C/min to 10 °C/min |
Temperature accuracy | ±0.03 °C |
Temperature resolution | ±0.001 °C |
Min. temperature | 0.1 °C |
modulation amplitude | |
Min. temperature | 10 s |
modulation period | |
Temperature control | Peltier |
Material in contact with sample |
Prism | Synthetic sapphire |
Sample well | Stainless steel |
Seal | FFKM |
Components |
Light source | LED light source, average lifetime > 100000 h |
Wavelength | 589 nm (by wavelength-adjusted interface filter) |
Power requirements | 100 to 240 VAC ±10 %, 50/60 Hz, min. 10 W, |
| max. 200 W, depending on sample temperature |
| setting and ambient temperature |
Dimensions |
WxHxD [mm] | Measuring unit: 195 x 135 x 194 |
| Communication unit: 215 x 95 x 190 |
Weight [kg] | Measuring unit: 6.1 |
| Communication unit: 3.7 |
Further specification |
Protection class | Measuring unit: IP68** |
| |
To get information about: «TORC 5000» contact us by phone (044) 229 15 31 or fill in the form.