• The only commercially available stage specially designed for in-situ SWAXS studies of stress/strain phenomena
• For investigating fibers, foils, and thin films
• Studies at forces between 0.01 N and 600 N
• Temperature range from -150 °C to +350 °C
The Tensile Stage is the perfect stage for investigating the stress/strain phenomena of fibers, foils, and thin films in both the SAXS and WAXS range. It is equipped with a full-range load cell and a high-resolution load cell. The stress/strain investigations can be performed at ambient conditions and combined with the dedicated Heated/Cryo Module in a temperature range from -150 °C to +350 °C.
Straining samples at full force and with high resolution
The Tensile Stage enables stress/strain studies at forces between 0.01 N and 600 N. Choose between two load cells:
• The low-range, high-resolution cell for forces from 0.01 N to 5 N
• The full-range cell for forces from 1 N to 600 N
The Tensile Stage includes an easy-to-use software for stage control and data acquisition. You can use it to program complex load profiles.
Stress/strain studies from -150 °C to 350 °C
The Tensile Stage has a dedicated Heated/Cryo Module 2.0 for stress/strain studies in a temperature range from -150 °C to 350 °C. The optional Heated/Cryo Module 2.0 is mounted on the Tensile Stage and due to its design maximum temperature homogeneity within the sample is guaranteed. The module is counter-cooled to minimize the temperature impact on the system housing during heating and cooling.
| Модель | Tensile Stage |
| Tensile force | 0.01 N to 600 N |
| Temperature range | -150 °C to +350 °C |
| Temperature accuracy | +/-0.1 °C |
| |
Surface Characterization.pdf
To get information about: «Tensile Stage 2.0» contact us by phone (044) 229 15 31 or fill in the form.