ru-RUuk-UAen-GB

MEDIACLAVE 30 Media Sterilizer

Full description
The MEDIACLAVE 30 Media Sterilizer allows the rapid and gentle sterilization of 3 – 30 L culture medium. Precise controlling and monitoring of temperature, time and pressure during the sterilization process guarantee constant high quality. The intuitive graphical user interface and the simple programming make it very easy for everyone to operate MEDIACLAVE.

Insert the cuvette, fill in the coupling water and you are ready to prepare your culture medium. The culture medium can be suspended and dissolved directly within MEDIACLAVE.

Operation modes:
1. STANDARD mode: For the preparation of standard and highly sensitive culture media. Sterilization temperature/time and dispensing temperature can be set.
2. CHOCOLATE AGAR mode: A special two-step program that allows the preparation of complex media. After the first sterilization phase, supplement, e.g. blood, can be added through the adding port.
3. WATER BATH mode: For pre-swelling culture media prior to sterilization within the temperature range 30 – 80°C.

High Operational Safety
An automatic tightness check at the beginning of each sterilization cycle prevents the instrument from starting if, for example, the lid seal of the vessel is not inserted properly. MEDIACLAVE is equipped with several independent monitoring systems for pressure and temperature, guaranteeing the highest safety standards for the user and the working environment. The vessel lid is equipped with an autonomous overpressure safety valve and a burst disc in case all other electronic monitoring systems fail.

Fast Heating
Powerful heating elements permit fast media processing. This minimises thermal stress and ensures high fertility of your culture media.

Reliable Sterilization
The large and strong magnetic stirrer with adjustable speed and reversing rotation direction ensures homogenous media preparation over a wide viscosity range. A Pt-1000 temperature probe and microprocessor control of all relevant process parameters allow reliable and complete sterilization of culture media.

Rapid Cooling
Rapid cooling is enabled by an efficient plate heat exchanger. The spatial separation of the cooling water system and the sterilization chamber makes it virtually impossible that culture media will get contaminated by cooling water. The built-in support pressure system prevents a delay in boiling during the rapid cool down phase and thereby allows an extraordinary fast and gentle cooling.
Product specification
Technical Data
  MEDIACLAVE 10  MEDIACLAVE 30
Capacity
Stainless steel cuvette  1 – 10 L  3 – 30 L
Autoclave cuvette (Ø, H) 254 mm, 203 mm
Temperature range    
Sterilization  30°C – 122°C  30°C – 122°C
Dispensing 20°C – 80°C  20°C – 80°C
Water bath  30°C – 80°C  30°C – 80°C
Max. temperature deviation    +1.0°C/-0.2°C   +1.0°C/-0.2°C
Stirrer speed
Selectable 50 – 200 rpm, reversing direction  50 – 200 rpm, reversing direction
Utilities
Heating Capacity  Max. 3 kW  Max. 9 kW
Interfaces   2 x RS232, Ethernet, USB port, AUX contact, footswitch, ext. pinch valve 2 x RS232, Ethernet, USB port, AUX contact, footswitch, ext. pinch valve
Cooling water connections  ¾" thread  ¾" thread
Electricity supply
All MEDIACLAVE 10 instruments  200 – 240 V 50/60 Hz, 16 A  
MEDIACLAVE 30, US/JP (136 050) 200-208 V 3~/PE, 50/60 Hz, 30 A
MEDIACLAVE 30, EU (136 055)   400 V 3~/N/PE, 50/60 Hz, 16 A
Dimensions and weight
Basic Device (H x W x D) 480 mm x 550 mm x 640 mm  1040 mm x 550 mm x 640 mm
Weight  57 kg  85 kg
Ordering information
INSTRUMENTS Plug Part No.
MEDIACLAVE 10  10 Litres Media Preparator complete with cuvette, lid seal, magnetic stirrer, decanting tubing, fitting for dispensing tubing, integrated printer and printer splash guard (200-240 V, 50/60 Hz) EU (CEE 7/7)  136 000
US (NEMA L6-30P) 136 010
no plug  136 020
                 
MEDIACLAVE 10  10 Litres Media Preparator complete with cuvette, lid seal, magnetic stirrer, decanting tubing and fitting for dispensing tubing (200-240 V, 50/60 Hz) EU (CEE 7/7)  136 005
US (NEMA L6-30P) 136 015
no plug  136 025
    Voltage  Part No.
MEDIACLAVE 30  30 Litres Media Preparator complete with cuvette, lid seal, magnetic stirrer, decanting tubing, fitting for dispensing tubing, integrated printer and printer splash guard (Without plug) 3x 200-208 V 50/60 Hz (US, JP)  136 050
3 x 400 V 50/60 Hz (EU) 136 055
    MEDIACLAVE  Part No.
Accessories 
Stainless steel cuvette for medium sterilization  10 136 030
for medium sterilization, incl. stainless steel guide tube (length 311 mm) for temperature probe cuvette, stainless steel with grid insert and flexible temperature probe 30 136 060
Autoclave kit  for autoclaving/thermostatting liquids in containers, incl. autoclave cuvette, stainless steel with grid insert and flexible temperature probe 10 136 070
Magnetic stirrer bar  for homogeneous medium mixing within the cuvette  10 132 130
Magnetic stirrer bar with paddle  for MEDIACLAVE 30 or homogeneous stirring of high viscosity agar media within MEDIACLAVE 10 10 + 30 136 075
Decanting tubing  for insertion into the sterilization chamber/cuvette for dispensing, incl. silicone tubing, stainless steel nozzle and securing nut 10 136 034
  for insertion into the sterilization chamber/cuvette for dispensing, incl. rigid stainless steel tube (length 613 mm), silicone tubing and securing nut 30 136 061
Fitting for dispensing tubing  for connecting tubing (inner diameter 6 mm) to dispense port, incl. stainless dispense port fitting and spring 10 + 30 136 035
Printer splash guard for protecting the integrated printer from splashes  10 + 30  136 040
Tubing connector for adding port for adding large volumes of supplements through the adding for adding port port using a silicone tubing (inner diameter 6 mm) 10 + 30  136 049
Injection lid  for sterile injection of supplements through the adding port, incl. cap, punched disc and septum membrane (silicone/PTFE) 10 + 30  136 247
Pressure dispensing kit  for direct pressure dispensing, incl. pinch valve box, foot switch, silicone tubing and stainless steel dispensing tube 10 + 30  136 064
Dispensing tube  for pressure dispensing, length 10 cm, stainless steel, one end dented  10 + 30  171 056
Foot switch w. connecting cable  for pressure dispensing, to trigger the pinch valve  10 + 30 143 200
Volume measuring stick  for convenient measurement of the product volume in the cuvette  30 136565
Consumables
Lid seal  for sealing the vessel lid, silicone  10 + 30  135 860
Septum membrane  for injection lid, silicone/PTFE, self-resealing, 10-pack  10 + 30  136 047
Paper rolls  for integrated dot matrix printer, 10-pack  10 + 30  136 038
Ink ribbon  for integrated dot matrix printer  10 + 30  136 901
Silicone tubing  for pressure dispensing, length 25 m (bulk roll), inner diameter 6 mm, autoclavable 10 + 30  171 036
Downloads
Currently there is nothing to download
Multimedia
wosdMi6liGM



To get information about: «MEDIACLAVE 30 Media Sterilizer» contact us by phone (044) 229 15 31 or fill in the form.
E-mail
Phone
First name
Family name
Country
Company name
Request
Input symbols from the picture