Specifications |
Wide range of volumes: typical volume and flow values for different tubing sizes |
Tubing inner diameter (ID) | 1 mm | 2 mm | 3 mm | 4 mm | 6 mm |
Dose volume with CV* < 1% | > 0.5 ml | > 1 ml | > 3 ml | > 7 ml | > 15 ml |
Flow rate range (ml/min) | 0.6 - 52 | 2.1 - 203 | 4.8 - 475 | 8.4 - 837 | 16 - 1634 |
* Coefficient of variation (CV), a measure for the reproducibility of dosing | |
| | | | | | | |
Dose volume | 0.1 ml - 9’999 ml | | |
Flow rate | 0.6 ml/min - 5 L/min | | |
Tubing inner diameter | 1 - 8 mm | | |
Tubing wall thickness | 1.6 mm | | |
Dimensions (H x W x D) | 203 x 210 x 191 mm | | |
Weight | 3.5 kg | | |
Interface | 2x RS232 | | |
Input voltage | 100 – 240 VAC 50/60 Hz | | |
Ordering information |
DESCRIPTION | PART No. |
DOSE IT P910 Peristaltic pump complete with: | 171 000 |
| 1 Silicone tubing, inner diameter 4 mm, length 2.5 m | |
| 2 Aspiration / dispensing tubes, length 10 cm, stainless steel, one end dented | |
| 1 Aspiration / dispensing tube, length 35 cm, stainless steel, one end dented | |
| 1 Tube collar | |
| 1 Pipette-tubing connector | |
| Mains adapter | |
Accessories | |
Foot switch for hands-free operation, with connecting cable | 143 200 |
Benchtop switch for hands-free operation, with connecting cable | 171 081 |
Retort rod with filling arm retort rod diameter 10 mm | 171 091 |
Extension pumphead for double pumphead assembly | 171 090 |
Silicone tubing set for double pumphead, inner diameter 8 mm, length 3.0 m | 171 088 |
Pipette-tubing connector for connecting pipettes to 2 - 6 mm inner diameter silicone tubing, autoclavable, 5-pack | 171 077 |
Pumphead (spare part) | 103 520 |
| |
Consumables | ID (mm)* | |
Silicone tubing | length 2.5 m, autoclavable | 1 | 171 021 |
| | | | 2 | 171 022 |
| | | | 3 | 171 023 |
| | | | 4 | 171 024 |
| | | | 6 | 171 026 |
| | | | 8 | 171 028** |
| | | length 25 m (bulk roll), autoclavable | 1 | 171 031 |
| | | | 2 | 171 032 |
| | | | 3 | 171 033 |
| | | | 4 | 171 034 |
| | | | 6 | 171 036 |
| | | | 8 | 171 038** |
Aspiration / dispensing tube | length 10 cm, stainless steel, one end dented | 1 | 171 051 |
| | | | 2 | 171 052 |
| | | | 3 | 171 053 |
| | | | 4 | 171 054 |
| | | | 6 | 171 056 |
| | | | 8 | 171 058 |
| | | length 35 cm, stainless steel, one end dented | 4 | 171 064 |
| | | | 6 | 171 066 |
| | | | 8 | 171 068 |
Tube collar | Used as a weight for the aspiration tube or as a clamp spacer for the dispensing tube | 1 – 3 | 171 071 |
| | | 4 – 6 | 171 074 |
* ID - inner diameter ** only for pumping applications | | |
| | | | | | | |