Classic.Line | Series FD with forced convection

Full description

Class 2 independent adjustable temperature safety device (DIN 12880) with visual alarm

Product specification

Model	FD 23
Measures
Interior volume [L]	20
Net weight of the unit (empty) [kg]	27
Permitted load [kg]	25
Load per rack [kg]	12
Internal Dimensions
Width [mm]	222
Height [mm]	330
Depth [mm]	300
Doors
Unit doors	1
Outer dimensions
Width net [mm]	435
Height net [mm]	495
Depth net [mm]	520
Wall clearance back [mm]	160
Wall clearance sidewise [mm]	100
Environment-specific data
Energy consumption at 150 °C [Wh/h]	300
Fixtures
Number of shelves (std./max.)	2/4
Performance Data Temperature
Temperature range 5 °C above ambient temperature to [°C]	300
Temperature variation at 150 °C [± K]	2.5
Temperature fluctuation at 150 °C [± K]	0.3
Heating-up time to 150 °C [min]	25
Recovery time after 30 seconds door open at 150 °C [min]	6
Air change data
Air change (approx.) at 150 °C [x/h]	64
Electrical data
Rated Voltage [V]	230
Power frequency [Hz]	50/60
Nominal power [kW]	1
Unit fuse [A]	10
Phase (Nominal voltage) [ph]	1~

All technical data is specified for unloaded units with standard equipment at an ambient temperature of +22 °C ±3 °C and a power supply voltage fluctuation of ±10%. The temperature data is determined in accordance to BINDER factory standard following DIN 12880, observing the recommended wall clearances of 10 % of the height, width, and depth of the inner chamber. All indications are average values, typical for units produced in series. We reserve the right to change technical specifications at any time.

Downloads

Classic.Line | FD Серия Вынужденная конвекция Модель FD 23

To get information about: «Classic.Line | Series FD with forced convection» contact us by phone (044) 229 15 31 or fill in the form.

E-mail

Phone

First name

Family name

Country

Company name

Request

Input symbols from the picture

Change the picture