The single sample changer for easy operation

The new industrial- grade peristaltic pump of Xsample 320 enables measurements at the push of a button. Once the parameters are set, user-independent filling and therefore a reduction of handling errors can be achieved with this sample changer designed for single samples. Operators are able to focus on more important tasks while filling and measurement are performed automatically. The flexible filling speed of Xsample 320 ensures optimized sample treatment, which leads to perfect measuring results.

Easy to operate and reduction of handling errors
• Enter the filling parameters via touchscreen, mouse, or keyboard for quick and easy data entries
• Fast assignment of methods with specific settings to suit the sample’s characteristics
• Adjustable pump speed for optimized filling behavior and reduction of user errors
• User-independent filling of the master instrument ensures repeatable measuring results

High sample throughput and increase of productivity
• Short filling times due to the industrial- grade peristaltic pump and replacement of the sample without intermediate cleaning
• Multiple filling out of one vial for the highest accuracy: The density deviation between two subsequent measurements is calculated and validated.
• Operators can focus on more important work instead of performing every measuring step manually.

Robust design and easy installation
• For aggressive samples all wetted parts of the Xsample™ 320 (high resistance) are made of highly resistant materials
• The maintenance-free peristaltic pump ensures trouble-free operation during its long life cycle.
• Plug and Play: Xsample™ 320 is automatically activated when the master instrument is started.
• Unified software user interface at the master instrument for easy operation and a short training phase

Model	Xsample™ 320 (High-resistance)
Viscosity range	up to 3,000 mPa•s at ambient and measuring temperature*
Filling mode	with peristaltic pump:
	Suction mode in one direction
	Suction mode with pumping back and forth at the beginning
Typical time for filling	2 to 5 minutes
and measuring cycle
Minimum sample volume	approx. 10 mL to 20 mL
Environmental conditions	indoor use only
(EN 61010)
Operating temperature	+15 to +35 °C
Pollution degree	2
Over voltage category	II
Altitude	max. 3,000 m (9,840 ft)
Power supply	supplied by the master instrument
	AC power supply voltage according to technical data plate
	at the rear of the master instrument
	(protective grounding required)
Dimensions LxWxH         Xsample™	205 mm x 148 mm x 185 mm
320Xsample™ 320 High-resistance	205 mm x 148 mm x 205 mm
Weight excl. master instrument
Xsample™ 320	approx. 3.4 kg
Xsample™ 320 High-resistance	approx. 3.5 kg
* Recommended for samples with a viscosity up to 500 mPa•s at ambient and measuring
temperature. For samples with a viscosity higher than 500 mPa•s at ambient and
measuring temperature, bubbles may occur during filling

⚬ Cleaning Recommendations for Alex 500

⚬ Petroleum Industry Anton Paar process solution throughout all production steps

⚬ Базові відомості про масу та густину

⚬ Визначення в'язкості розчинів метилцелюлози

⚬ Визначення концентрації шляхом вимірювання густини

⚬ Використання принципу осцилюючої U-трубки в лабораторних електронних густиномірах

⚬ Густина рідин

⚬ Приклади використання вимірювання густини