Especially in high-speed gearing and high-volume pumping systems, the tendency of oils to foam can lead to inadequate lubrication or cavitation which may result in mechanical failure.
Benefits at a Glance
Available as twin-bath arrangement
Four test places in each bath
Temperature of each bath can be maintained individually
Convenient Operation
Digitally-indicating circulation thermostats with cooling coil, temperature probe and self-optimizing electronic heating control
Borosilicate jars (20 L) with leakage protection vessels
Test equipment for 2 test places per bath included
Customized User Flexibility
Different gas diffusers: cylindrical-shaped (included) and ball-shaped (optional)
Test set ASTM D6082 sequence IV (optional)
Air-drying tower (optional)
Diffuser stone test set (optional) to check the maximum pore diameter and permeability
Air-volume test sets (optional) to check the total air-flow rate
Upgrade kit (optional) to use all 8 test places simultaneously
| |
Model | Foam Tester |
| |
Application range | 24 °C to 150 °C |
Test places | 1 to 8 |
Flow meter range | 0.4 L/h to 7 L/h |
Air supply | 94 mL/min or 200 mL/min |
Safety | Overheat and low-level protection, |
| leakage protection vessel |
Power supply | 115 V or 230 V, 50 Hz/60 Hz |
Dimensions (W x D x H) | 325 mm x 325 mm x 625 mm (per bath) |
Weight | 50 kg (twin-bath arrangement) |
| |
| |
Foam Tester Anton Paar
Foam Tester Anton Paar
To get information about: «Foam Tester» contact us by phone (044) 229 15 31 or fill in the form.