CboxQC™ is the precise combined CO2 and O2 meter which allows reliable QC on finished packages as well as highly accurate measurements in the laboratory for product development. It gives you fast, accurate, and reliable determination of dissolved carbon dioxide and oxygen in beverages. When combined with Anton Paar’s PFD filling device, sample is taken directly from the package into the measuring chamber of CboxQC™ – with no loss of dissolved carbon dioxide and dissolved oxygen during sample transfer. CboxQC™ for the laboratory provides reliable CO2 and O2 results, even out of very small packages.
High accuracy, more benefit
• CO2 measurement based on the patented Multiple Volume Expansion method guarantees repeatability standard deviation of 0.005 vol.
• No influence of other dissolved gases such as air or nitrogen
• The new high-resolution optochemical O2 sensor is accurate and achieves a repeatability standard deviation of ±2 ppb
Efficient and quick to finish
• Low sample volume of around 100 mL provides reliable CO2 and O2 results, even out of very small packages
• PFD filling device transfers sample from the package into the measuring chamber without any loss of CO2
• CO2 and O2 results after only 90 seconds
• Intuitive user interface with clearly arranged navigation of the menu
• Ready to go once out of the box
• Clear sample identification for full traceability of 500 measurement results
Built-in support for the most precise results
• FillingCheck™: automatically detects filling errors and generates a warning message
• SystemCheck: guides the operator through recommended periodical checks
TPO quick check
• The TPO (total package oxygen) value can be calculated via Anton Paar’s free software AP-SoftPrint or by connecting to a DMA™ Generation M system
Modular options for the future
• Extend or build your own measuring system in the future by connecting a DMA™ Generation M density meter or Soft Drink Analyzer M (with software release 2.40) with further Anton Paar modules and measure up to seven parameters in one measuring cycle
Fast and wireless
• Bluetooth interface for wireless printing
• USB interface for data transfer to a PC
• RFID interface for changing measurement settings quickly by reading RFID tags
| Model | CboxQC™ |
| Measuring range |
| CO2 | 0 g/L to 12 g/L (0 vol. to 6 vol.) at 30 °C |
| | 0g/L to 20 g/L (0 vol. to 10 vol.) < 15 °C |
| O2 | 0 ppm to 4 ppm |
| Temperature | -3 °C to +40 °C (27 °F to 104 °F) |
| | Accuracy: ± 0.2 °C |
| Pressure | 0 bar to 10 bar absolute (0 psi to 145 psi) |
| Repeatability s.d. | |
| CO2 | 0.01 g/L (0.005 vol.) |
| O2 | ± 2 ppb (in the range < 200 ppb) |
| Reproducibility s.d. | |
| CO2 | 0.05 g/L (0.025 vol.) |
| O2 | ± 4 ppb (in the range < 1000 ppb) |
| | ± 10 ppb (in the range of 1000 to 2000 ppb) |
| | ± 20 ppb (in the range of 2000 to 4000 ppb) |
| Resolution | |
| CO2 | 0.001 g/L |
| O2 | 0.1 ppb (in the range < 100 ppb) |
| Additional information |
| Sample volume | approx. 100 mL |
| Measuring time per sample | approx. 90 seconds |
| Internal storage | 500 measured results |
| Interfaces | 1 x RS-232 for PC and printer |
| | 1 x USB for PC |
| | 1 x RFID, 1 x Bluetooth (optional) |
| Protection class | IP67 |
| Power supply | AC 100 - 240 V, 50/60 Hz, 1.5 A |
| | DC 12 V, 3.0 A |
| Rechargeable battery type | Li-Ion 11.1 V, 2.25 Ah |
| | (optional: Li-Ion 11.25 V, 2.6 Ah) |
| Maximum at-line operation | 10 hours |
| Dimensions (L x W x H) | 258 mm x 201 mm x 170 mm |
| | (10.2 in x 7.9 in x 6.7 in) |
| Weight | 2.6 kg (5.7 lbs) |
| |
A_Brochure_CO2O2TPO_meter_series.pdf
To get information about: «CboxQC™» contact us by phone (044) 229 15 31 or fill in the form.