CHM® SPE units contains Polyethersulfone (PES) membrane.
These CHM® ready-to-use syringe filter units are designed to remove particles during general filtration. They are ideal for use in life science applications.
Preparation of aqueous, biological or protein based solutions for chromatography analysis.
Up to 100 ml of sample. Also available in individual sterile peel-pack.
They are supplied in two pore sizes, 0.2 and 0.45 µm, and in two diameters 13 and 25 mm.
Features:
· Hydrophilic membrane
· Low protein binding
· Fast flow rates
· Wide range of chemical compatibility
· High flow rates
· Not autoclaved. Sterilization only by gamma irradiation or ethylene oxide
Applications:
· Purification and sterilization of aqueous solutions and/or biological samples
· Protein and enzyme filtration sterilization
· IC chromatography
· Cell culture
· Tissue culture media sterilization
| DIAMETERS | 13 mm | 13 mm | 25 mm | 25 mm |
| Pore size | 0,2 µm | 0,45µm | 0,2 µm | 0,45 µm |
| Bubble point | 2,0 bar | 0,7 bar | 2,0 bar | 0,7 bar |
| Filtration area | 1,7 cm2 | 1,7 cm2 | 4,8 cm2 | 4,8 cm2 |
| Flow rates | 8 ml/min | 12 ml/min | 100 ml/min | 150 ml/min |
Typical values for
water at 15 psi and
23 ºC (100 kPa)
differential pressure
| | | | |
| Order information |
| ORDER NUMBER | PORE SIZE (µm) | DIAMETER (mm) | STERILE | QUANTITY/ BOX |
| SPE020013K-S | 0,2 | 13 | YES | 50 |
| SPE020013Q | 0,2 | 13 | NO | 500 |
| SPE020025K-S | 0,2 | 25 | YES | 50 |
| SPE020025H | 0,2 | 25 | NO | 100 |
| SPE020025Q | 0,2 | 25 | NO | 500 |
| SPE045013K-S | 0,45 | 13 | YES | 50 |
| SPE045013Q | 0,45 | 13 | NO | 500 |
| SPE045025K-S | 0,45 | 25 | YES | 50 |
| SPE045025H | 0,45 | 25 | NO | 100 |
| SPE045025Q | 0,45 | 25 | NO | 500 |
| | | | |
To get information about: «SPE Polyethersulfone syringe filters» contact us by phone (044) 229 15 31 or fill in the form.