Powerful and flexible purification solutions
The Sepacore® flash chromatography systems X10 and X50 address most requirements for the purification of organic compounds. Whether a crude synthesis mixture or a plant extract has to be purified, the system offers an optimal performance and scale-up capability.
Flexible
• High efficiency separations at a pressure up to 50 bar
• Saves time by simultaneously monitoring four wavelengths
• Multisignal monitoring for peak detection and fraction collection
Powerful
• Suitable for all flash purification requirements
• Easy system expansion with a modular configuration
• Wide choice of corresponding flash cartridges and glass columns
• Detection over all UV-Vis range
• Optional ELSD
Scalable
• Sample injection scalable from a few milligrams up to hundred grams
• Elution flow rate up to 250 mL/min
• Purification scale-up performance on large cartridges (up to 1600 g) or glass columns
| | |
| Model | Sepacore® X10 system | Sepacore® X50 system |
| | |
| Pressure range | Up to 10 bar | Up to 50 bar |
| Flow rate range | 2.5 – 250 mL/min |
| Flow rate accuracy | +/- 2 % of the set flow rate |
| Reproducibility | +/- 0.5 % of the set flow rate |
| Peak detection | Up to 8 detectors channels (4 analog, 4 digital) |
| | |
| Fraction collector C-660 | | |
| Collection area (W x D) | 440 mm x 350 mm |
| Interface | | |
| 2 × RS485 |
| 1 × RS-232 (process data output) |
| 1 × Mini-DIN (waste valve) |
| 1 × Mini-DIN (TTL In / alarm monitoring and/or ext. start) |
| 1 × Mini-DIN (level sensor for waste container) |
| 2 × Analog ports (detector signal input) |
| 2 × Analog ports (for chart recorder) |
| Compatible racks | | |
| | 4 × FC60: 4 × (60 × 20 mL tubes) |
| | 4 × FC30: 4 × (30 × 50 mL tubes) |
| | 4 × FC12: 4 × (12 × 250 mL tubes) |
| | Syncore racks (R4, R6, R12, R24, R48, R96) |
| | Customized racks |
| Connection voltage | 100 – 230 V ± 15 % |
| Fuse | T500 mA L 250 V |
| Frequency | 50 / 60 Hz |
| Power consumption | max. 25 W |
| Degree for protection | IP20 |
| Overvoltage category | II |
| Pollution degree | 2 |
| Dimensions (W × H × D) | 550 × adjustable from 488 to 578 × 550 mm |
| Weight | about 36 kg |
| | |
| Pump C-601 / C-605 | | |
| Gradient | Binary |
| Pump type | Radially arranged 3 – piston pump |
| Pump head | Integrated piston back flushing |
| Function | 3 – piston pump chemically inert and biocompatible |
| Material in contact with solvent | PEEK, sapphire, ceramic, FEP, ruby |
| Interface | 4 x RS485 |
| Connection voltage | 100 – 230 V ± 15 % |
| Frequency | 50 / 60 Hz |
| Power consumption | max. 75 W |
| Degree for protection | IP20 |
| Overvoltage category | II |
| Pollution degree | 2 |
| | |
Системы флэш-хроматографии Sepacore® X10 и X50
Брошюра на русском языке
Sepacore® X10 / X50 system Technical data sheet
Sepacore® X10 / X50 system
Technical data sheet
Sepacore® X10 and X50 flash chromatography systems address most requirements for the purification of organic compounds. Whether a crude synthesis mixture or a plant extract has to be purified, the system offers optimal performance and scale-up capability.
Preparative_Chromatography_Solution_brochure_ru_A_01.pdf
To get information about: «Sepacore® flash systems X10 / X50» contact us by phone (044) 229 15 31 or fill in the form.