All compounds visible at once
The Evaporative Light Scattering Detector (ELSD) detects all non-volatile compounds, including those invisible to other detectors. The C-650 handles any combination of mobile phases and gradients required for efficient and fast separations.
Universal
• Detection of all compounds regardless of spectroscopic properties
• Unaffected by elution gradients
• Detection of semi-volatile analytes thanks to low temperature evaporation
• Enhanced flexibility for the choice of elution solvents
Easy to use
• Standard set of parameters suitable for most applications
• Minimum warm-up time
• Use any volatile solvent
• Easy quantitative estimation with mass sensitive detection
Flexible
• High flow rate range (up to 250 mL/min) using optimized flow splitter
• Preparative applications with a specific nebulizer
• Minimal amount of sample lost in the detection process
| |
| Model | ELS Detector C-650 230V / 50Hz |
| |
| Dimensions (WxHxD) | 250 x 450 x 550 mm |
| Weight | 18.5 kg |
| Current consumption | 1.7 A for 230V |
| Frequency | 50/60 Hz |
| Overvoltage category | II |
| Pollution degree | 2 |
| Detection | High sensitivity photomultiplier |
| Light source | Selected high efficiency blue LED |
| Temperature range | Ambient to 100°C |
| Gas consumption | < 5 L/min |
| Eluent flow rate | 0.1 to 5 mL/min |
| Instrument control | Stand alone keypad control or remote control through RS-232 |
| Signal output | 0 – 1 V analog or RS-232 |
| Inputs | Remote autozero and remote
Power down mode |
| Power down modes | General, Standby or Cleaning |
| |
Technical data sheet in English
Preparative_Chromatography_Solution_brochure_ru_A_01.pdf
To get information about: «ELS Detector C-650» contact us by phone (044) 229 15 31 or fill in the form.