The single sample changer for different syringe sizes

Xsample 340 is a single sample changer for different types of syringes that automatically fills all Anton Paar master instruments using your favorite syringes. Perfect filling and excellent precision are facilitated by the system’s adjustable filling speed. Many years of trouble-free operation are guaranteed due to the straightforward and robust design. Xsample 340 is automatically prepared with up to two cleaning agents, ensuring perfect measuring conditions regardless of the operator and sample.


Perfect measuring results due to perfect cleaning
• Automatic rinsing and drying after each sample prevents sample carry-over which ensures the best measuring results.
• Up to two different cleaning agents can be used for an individual cleaning procedure.
• Measurement of a great variety of samples from low-viscosity samples up to 36,000 mPa.s
• Automatic air check before measurement to rule out sample cross-contamination

Easy handling
• Different adapters for 2.5 mL and 10 mL Braun syringes for your most frequently used consumables.
• Depending on the system size, a minimum amount of sample is needed – advisable when handling expensive or hazardous samples.
• Unified software user interface at the master instrument for easy operation and a short training phase.
• Force sensor used to adjust the filling speed for optimized filling behavior and reduction of user errors.

Intelligent instrument design
• For aggressive samples all wetted parts of Xsample 340 are made of highly resistant materials
• Robust instrument for measurements under harsh environmental conditions.
• High safety standard: when opening the safety cover the sampling procedure immediately stops in order to protect the operator
• Space-saving design and quick installation of instrument for self-explanatory start-up before first use

Model	Xsample340
Viscosity range	36,000 mPa·s at ambient and measuring temperature
Supported syringes	2 mL Luer plastic for sample viscosity up to 36,000 mPa·s
	5 mL Luer plastic for sample viscosity up to 10,000 mPa·s
	10 mL Luer plastic for sample viscosity up to 9,000 mPa·s
	5 mL glass for sample viscosity up to 10,000 mPa·s
Filling mode	Force applied by syringe
Minimum sample volume	approx. 3 mL
per measurement	depending on system configuration
Rinsing liquid consumption	approx. 7 mL (if rinse time: 10 s)
	approx. 11 mL (if rinse time: 15 s)
Compressed air supply	0.3 bar (4.35 psi) relative (air supply of the master instrument)
	max. 1.5 bar (21.8 psi) relative (air supply of Xsample 340)
	optional: 2.0 bar (29 psi) relative (external compressed air)
Necessary quality of air	Class 3 from ISO 8573-1:
	max. particle size: 5 μm
	max. pressure dew point: –20°C (–4°F)
	max. oil content: 1 mg/m3
Environmental conditions	Indoor use only
Air humidity	10 to 90% relative humidity, non-condensing
Operating temperature	+15 to +35 °C
Dimensions LxWxH	480 mm x 230 mm x 420 mm
	excl. master instrument
Weight	approx. 9.4 kg excl. master instrument
Power supply	supplied by master instrument
	Mains voltage according to the type plate at the rear of
	master instrument (protective grounding required)

⚬ Cleaning Recommendations for Alex 500

⚬ Petroleum Industry Anton Paar process solution throughout all production steps

⚬ Базові відомості про масу та густину

⚬ Визначення в'язкості розчинів метилцелюлози

⚬ Визначення концентрації шляхом вимірювання густини

⚬ Використання принципу осцилюючої U-трубки в лабораторних електронних густиномірах

⚬ Густина рідин

⚬ Приклади використання вимірювання густини