L-Rix 4100
• 0 to 80 °Brix-range model with ±0.1 °Brix accuracy
• Maintenance-free
• Transmitter with standard °Brix formula
• Integrated analog outputs and HMI
L-Rix 5100
• Full-range model with ±0.1 °Brix accuracy
• Maintenance-free, EHEDG-certified
• Standard and custom-specific concentration formulas
• Optional HMI, various analog/digital and fieldbus interfaces
• USB configuration via free Pico 3000 software
L-Rix 5200
• 0 to 65 °Brix-range model with ±0.05 °Brix accuracy
• Maintenance-free, EHEDG-certified
• Standard and custom-specific concentration formulas
• Optional HMI and various analog/digital and fieldbus interfaces
• USB configuration via free Pico 3000 software
Durable and maintenance-free inline refractometer for real-time concentration measurements and production control of raw, intermediate, and final products. Industry-leading optics and maintenance-free operation with full CIP/SIP capability.
Maintenance-free – forget servicing and operating costs
The inline refractometer L-Rix 4100/5100/5200 uses industry-leading optics which dramatically extends the instrument’s service life, increases reliability and safety, and reduces costs. Once adjusted at the factory, L-Rix 4100/5100/5200 operates with the stored adjustment values for its entire lifetime. Benefit from “install and forget” simplicity and years of continuous operation.
Inline and highly accurate – real-time concentration measurement where it matters most
L-Rix 4100/5100/5200 provides continuous, real-time concentration results analogous to those of laboratory refractometers. It gives you automatic control and monitoring of your process – at precisely the right point.
Robust – for minimized downtime
Rigid stainless-steel housing for robust measurements under adverse process conditions, along with ingress protection of the enclosure, shield against water jets and immersion. Once CIP/SIP routines are completed, the sensor reactivates in just minutes to minimize downtime.
Plug and play – easy setup with maximum compatibility
No special training is required to set up and operate the instrument. L-Rix 5100/5200 is set up quickly and easily using the touchscreen interface of the built-in evaluation unit, via the Pico 3000 software, or mPDS 5 evaluation unit, while L-Rix 4100 comes ready with analog outputs and a touchscreen interface.
The sensors provide user-friendly diagnostics based on standard status categories according to NAMUR NE 107. Modular and expandable, L-Rix 5100/5200 can be easily adapted to support several communications protocols including analog (4 mA to 20 mA), Modbus RTU, Modbus TCP, HART, PROFIBUS DP, PROFINET IO, and EtherNet/IP.
| Model | L-Rix 4100 | L-Rix 5100 | L-Rix 5200 |
| Refractive Index | | |
| Range | 1,3100 to 1,4910 | 1,3100 to 1,5400 | 1,3100 to 1,4600 |
| | (equivalent of 0 % mass | (equivalent to 0 % mass | (equivalent to 0 % mass |
| | to 80 % mass) | to 100 % mass) | to 65 % mass) |
| Accuracy | nD ±0.0002 (equivalent | nD ±0.0002 (equivalent | nD ±0.0001 (equivalent |
| | to ±0.1% mass) | to ±0.1 % mass) | to ±0.05 % mass) |
| Repeatability | nD ±0.0001 (equivalent | nD ±0.0001 (equivalent | nD ±0.00005 (equivalent |
| | to ±0.05 % mass) | to ±0.05 % mass) | to ±0.025 % mass) |
| Calibration | Anton Paar’s proprietary calibration routine using high-purity water and commercial |
| | nD references |
| Materials of | Stainless steel 1.4404, PEEK, Sapphire (Al 2O 3 – 99.997 %) |
| wetted parts | O-ring 60x3 (VARIVENT N) , EPDM 70 |
| Detector | CMOS line sensor; 2048 elements |
| Light source | LED 589 nm |
| Temperature | Automatic temperature compensation; Integrated Pt-100 |
| compensation | | | |
| Ambient temperature | 0 °C to 50 °C | -20 to +60 °C |
| range | | |
| Process temperature | 0 °C to 100 °C | -20 to +120°C | 0 °C to 105 °C |
| | CIP/SIP up to 145 °C for 30 min |
| Process pessure | 100 mbar to 10 bar | 100 mbar to 16 bar (10 bar @ >120 °C) |
| absolute | | | |
| Degree of protection | IP65; IP67 / NEMA 6P |
| Communication | Analog | Analog, Analog/Digital, Modbus RTU, Modbus TCP, |
| | | PROFIBUS DP, PROFINET IO, EtherNet/IP |
| Process connections | Tuchenhagen VARIVENT® Type N | Tuchenhagen VARIVENT ® Type N, Tri-Clamp ® 3‘‘ |
| | | |
ExperiseProAnaly_Sensors_overview.pdf
To get information about: «Inline Refractometer: L-Rix 4100/5100/5200» contact us by phone (044) 229 15 31 or fill in the form.